Use your mSATA SSD hard drive as an external hard drive
Use your mSATA SSD drive as an external hard drive with this handy aluminum housing for mSATA SSD drives. This mSATA enclosure supports SSD drives with a maximum capacity of 2 TB. Due to the fast USB 3.0 Micro B port and the support of both SATA 2.0 and SATA 3.0, this housing can achieve a speed of up to 5Gbps. With the included USB 3.0 cable you can easily connect the mSATA housing to a free USB port of a Laptop or Desktop.
Support
Orico's mSATA enclosure supports Hot Swap, Plug&Play, UASP, SATA 2.0 and SATA 3.0.
Lightweight mSATA housing
With a weight of only 40 grams, this external hard drive housing is no problem to take with you on a trip. The thickness of the housing is only 11mm, so it fits in almost all types of bags, including your pocket.
Protect your SSD drive
By using this aluminum housing from Orico, you can be sure of a high degree of protection for your mSATA SSD drive. Free from dust and scratches and of course from a fall.
Easy to install
Installing your own SSD hard drive is no problem at all. Open the front panel with the supplied screwdriver and remove the printed circuit board from the housing. now click the SSD into the mSATA interface and slide the printed circuit board back into the housing. Retighten the screws and the disc is ready to use.
