ORICO 2739U3 2.5" USB3.0 Triple‐Protection SATA HDD Enclosure - Waterproof IP64 - 2739U3

Silicone 2.5 inch housing for HDD/SSD disk

Do you want to turn your HDD or SSD into an external hard drive? Then you can use a hard disk enclosure. Place your 2.5 inch HDD or SSD in a hard drive enclosure and you can take your drive anywhere. If you regularly take your external hard drive to the office or on a trip, it is important that it is well protected. With this silicone housing, your hard drive is provided with triple protection.

Triple protection

This stylish 2.5 inch hard drive housing is made of silicone. The housing offers triple protection, so that your 2.5-inch HDD or SSD is optimally protected. The use of silicone makes the case shock-resistant, which significantly reduces the impact on the hard drive when dropped. In addition, the silicone 2.5 inch housing is IP64, which means that it is dustproof and splashproof. The housing is also equipped with a cable slot, making it more convenient to store the cable and protect the interface from water and dust.

USB 3.0 technology: 5Gbps transfer rate

Because the housing has USB 3.0 technology, it is possible to achieve transfer speeds of up to 5Gbps. This is no less than 10 times faster than the transfer speed of USB 2.0! You can transfer a 1G file in just 5 seconds.

High-performance chip, LED indicator and intelligent sleep mode

The stylish and ultra-strong housing of Orico is equipped with a control scheme: a JMS578 chip. Partly because of this, the housing supports the UASP protocol and TRIM protocol. This improves performance, reduces CPU usage and improves transmission speed. Thanks to the LED indicator you can see exactly what the working status of the drive is. Not using the drive for a while? Then it goes into automatic sleep mode after 10 minutes. This extends the life of the hard drive.

Compatibility

The blue hard drive housing made of silicone is suitable for 2.5 inch HDD/SSD drives with a thickness of 7mm - 9.5mm and with a maximum capacity of 4TB. The housing can be connected to any USB 3.0 type-A port with the supplied data cable. In addition, no driver is required, the housing is plug and play and compatible with Windows, Mac OS and Linux.

Easy to use

The blue housing is easy to install. Loosen the screws with the supplied screwdriver and place your 2.5 inch HDD/SSD in the housing. Replace and tighten the screws. Your external hard drive is ready to use!

Product specifications:

✅ 2.5 inch SATA I, II, III HDD/SSD hard drive enclosure.
✅ For 2.5 inch hard drives with a thickness of up to 9.5mm.
✅ Output: USB 3.0 Micro B.
✅ Transfer rate: USB 3.0 up to 5Gbps SuperSpeed.
✅ Material: Silicone + Heat Resistant ABS.
✅ Max. own disk capacity: 4TB.
✅ High-performance chip.
✅ Control Scheme: JMS578.
✅ Triple protection.
✅ Plug and play.
✅ No driver required.
✅ Multi-Safety security system.
✅ IP64.
✅ Supports: all Windows versions, Linux and Max OS 9.1 and above.
✅ Compatible with PC, HD player, Smart TV, Smart router, Surface, NAS cloud server etc.
✅ Supports UASP and TRIM protocol.
✅ Auto sleep mode.
✅ Includes screwdriver for installation.
✅ LED indicator.
✅ Cable length: 40 cm.
✅ Weight: 78g.
✅ Color: blue.
✅ Product Dimensions: 159mm x 97mm x 18.5mm.