Call/ Whatsapp Us: 0192618799, 012-3590399 Email:sales@asashi.com.my
NETWORKING > COMMERCIAL > ACCESS POINT
NETWORKING

Click to zoom




NETWORKING

339.00 MYR

Out of Stock



Order:

Add to cart

Category : COMMERCIAL
Group : ACCESS POINT
Code : CPE510
UM : UNIT
Brand : TP-LINK
Variation : OUTDOOR

TP-Link CPE510 5GHz 300Mbps 13dBi Outdoor CPE - CPE510

5GHz 300Mbps 13dBi Outdoor CPE

  • Built-in 13dBi 2x2 dual polarization directional MIMO antenna
  • Adjustable transmission power from 0 to 12dBm / 16mw
  • System-level optimization for long-distance wireless transmission over 2.5 km
  • TP-LINK Pharos MAXtream TDMA (Time Division Multiple Access) improves throughput, capacity and latency performance and is ideal for PTMP applications.
  • Centralized management system-Pharos control
  • AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) Operation Mode
  • The passive PoE adapter supports PoE (Power over Ethernet) deployments up to 60 meters (200 feet) and can automatically reset the device.
  • For W56 (ch100 ~ 136) only
  • Acquired technical suitability

HARDWARE FEATURES
processor Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc
memory 64MB DDR2 RAM, 8MB Flash
Interface 1 10/100Mbps Shielded Ethernet Port (LAN0, Passive PoE)
1 Ground Ground
1 Reset Button
power supply Passive power supply over Ethernet over LAN0 (+4,5pins; -7,8pins)
Voltage range: 16-27VDC Powered
normally using the included passive PoE adapter
power consumption 10.5 w Max
NOTE: When deployed using passive PoE, the power drawn from the power supply will be slightly higher depending on the length of the connecting cable.
Dimensions (width x depth x height) 224 x 79 x 60 mm
Antenna type Built-in 13dBi 2x2 dual polarization directional antenna
Beam width: 45 ° (H side) / 30 ° (E side)
Note: Refer to the data sheet for details.
protection 15KV ESD protection
6KV lightning protection
Enclosure Outdoor ASA Stabilized Plastic Material
IPX5 Waterproof Certification
WIRELESS FUNCTION
Wireless standard IEEE 802.11a / n (Pharaos MAXtream disabled)
Dedicated protocol TDMA mode (Pharaos MAXtream enabled)
Wireless speed Maximum 300Mbps (40MHz, dynamic)
Maximum 144.4Mbps (20MHz, dynamic) Maximum 72.2Mbps
(10MHz, dynamic)
Maximum 36.1Mbps (5MHz, dynamic)
Frequency range W56: 5.5-5.68GHz (DFS)
NOTE: Available operating frequencies may vary depending on country or region restrictions where the device is used.
Transmission power 26dBm / 398mw (Adjustable Power / 1dBm)
Note: This is a hardware specification limit and the actual maximum transmit power may vary from channel to channel depending on the country or region restrictions in which the device is used.
SOFTWARE FEATURES
Wireless installation Pharos MAXtream TDMA Technology
802.11a / n Mode
Selectable Channel Width: 5/10/20 / 40MHz
Automatic Channel Selection
Transmit Power Control
Dynamic Frequency Selection (DFS)
WDS Enabled / Disabled
Security: WPA / WPA2, WPA-PSK / WPA2 -PSK (AES / TKIP) encryption, 64/128/152-bit WEP encryption
SSID broadcast enabled / disabled
multi-SSID / VLAN tagging (AP mode only)
distance / ACK timeout setting
wireless MAC address filtering
wireless setting:
> Beacon Interval / RTS Threshold / Fragmentation
> Threshold / DTIM Interval / AP Isolation / Short GI / Wi-Fi Multimedia
Management function Remote management and device detection using Pharos control application
HTTP / HTTPS Web-based management
system log
SNMP agent (v2c)
Ping Watchdog
Dynamic DDNS
SSH server
System tools Wireless Signal Quality Indicator:
Signal Strength / Noise / Transmit CCQ / CPU / Memory
Monitor: Throughput / Station / Interface / ARP / Root / WAN / DHCP
Spectrum Analyzer
Speed ​​Test
Ping
Traceroute
System level optimization Optimized IGMP Snooping / Proxy / Multicast Application Hardware Watchdog
PОE ADAPTER FUNCTION
Dimensions (W x D x H) 110 * 57 * 33.5mm
Interface 1 AC Jack / Earth Ground
1 10 / 100Mbps Shielded Ethernet Port (Power + Data)
1 10 / 100Mbps Shielded Ethernet Port (Data)
button Remote reset button
Power status LED green
input 100-240VAC, 50 / 60Hz
Input voltage 100VA ~ 240VAC @ 50Hz ~ 60Hz
Input current 0.4 Maximum @ 100VAC
output 24VDC, 0.5A maximum
+4, 5pins; -7, 8pins. (Maximum 60m power over Ethernet)
Output voltage 24VDC (+4,5pins; -7,8pins)
Efficiency > 80%
certification CE / FCC / UL / IC / GS / PSB / C-tick / SAA / S mark / KC mark
OTHERS
certification CE, FCC, RoHS, IPX5
accessories Outdoor Wireless CPE Body
24V 0.5A Passive PoE Adapter
Pole Mounting Strap
AC Cable
Installation Guide
System requirements Microsoft Windows 98SE, NT, 2000, XP, Vista ™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Operating environment Operating temperature: -30 ° C ~ 70 ° C (-22 ℉ ~ 158 ℉)
Storage temperature: -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉)
Operating humidity: 10% ~ 90% No condensation
Storage humidity: 5% ~ 95% No condensation
Reviews for this item
There are no reviews for this item.
Be the first to add a review for this item
Powered by
By expertAcounts.com